EN
G
LI
S
H
10
Switching the spray gun on
1. Connect the mains lead to a 220–240 V, 50 Hz power socket.
2. Turn on the compressor using the power switch (5).
3. Pull the trigger (15) until paint comes out.
Switching the spray gun off
1. Release the trigger.
2. Turn off the compressor using the power switch (5).
3. Unplug the mains lead from the wall socket.
Changing the paint nozzle
The spray gun comes with 2 paint nozzles, 1.8 mm and 2.6 mm. The smaller nozzle is
suitable for most purposes. The larger nozzle should be used if a high volume of paint
needs to be applied.
1. Remove the retaining ring (8).
2. Remove the air cap and paint nozzle and separate them.
3. Connect the air hose to
both the air compressor
and the spray gun.
3. Change the paint nozzle and
reassemble it with the air cap. Make
sure that the lugs on the air cap slot
into the notches on the paint nozzle.
4. Refit the parts onto the spray gun, making
sure that the lugs on the paint nozzle fit
into the notches on the spray gun.
5. Fasten the nozzles in place using
the retaining ring.
