User Manual Coda
®
ECO
TM
1200 V2 – October 18, 2017
Page 9
M-CODA-1200
Mounting the Coda
®
ECO
TM
1200 to the Wall
Note: Mounting the Unit to the Wall is Mandatory
The Use of Brakes on the Castors is Recommended
A mounting kit is included to secure the Coda
®
ECO
TM
1200 to a wall. The kit provides the necessary
hardware to safely secure the unit. D
ue to the various types of material the wall may be constructed
from the user will need to supply proper anchoring devices. Because each instance may present
a unique situation these are not included in the kit.
Kit contents:
Instructions: (see Figure 2)
1.
Drill holes to install wall anchoring device using the dimensions shown. Refer to instructions with the
anchoring device for proper hole size and installation.
2.
Loop the cable end through a bracket slot then secure the wall mount brackets to the wall. Use the
oversize washers with the anchoring hardware as shown.
3.
Attach the two long close eye bolts to the rear of the Coda
®
ECO
TM
1200.
4.
Use the oval threaded connector to secure the free end of the cables to the closed eye bolts.
Cleaning the Coda
®
ECO
TM
1200
Use a mild house-hold cleaner. Spray the cleaner on a clean soft cloth, then use the cloth to wipe down
the unit. Do not spray any liquid directly on the unit.
J016-D05182
91525A412
J016-A05181
9494T310
8947T11
X2
