Page 7 of 16
The Matrix network is designed to conveniently accommodate a large number of accessory devices. As more products utilizing CAT5
connectivity are integrated into the vehicle, routing of the cables can be accomplished in ‘daisy chain’ fashion, if desired. Serial lightbars
utilizing CAT5 will always be the last device in either the PRI-1 or SEC-2 chain. Further instructions, features, and control options are
detailed in the installation manual of the customer selected central node.
The following table indicates the default flash patterns of the serial lightbar. These patterns are activated by other Matrix compatible
products, connected to the lightbar. These can easily be reconfigured as desired, in the Matrix Configurator. See Matrix Configuration Quick
Start Manual for details.
Flash Patterns
Default
Description
Arrowstik Right
Building Fast
Right Scene
Steady
Left Scene
Steady
Takedown/Alley Flash
Single Flash 150 - Alternating
Arrowstik Left
Building Fast
Dim
30%
Cruise
Dim, Full Bar
Level 3
Pursuit - Alternating
Level 2
Triple Flash 115
Level 1
Sweep
Takedown
Steady
Front Cut
Arrowstik Flash
Quad Flash 115
