17
5. Selectable Coded Override
How to use E-Code
E-Code is a alternate method of emergency overriding and will
take the place of the push-button when selected. The factory preset
for this option is 1111 and can be programmed with any
combination of numbers 1-9 making sure to use all 4 digits.
Programming the 4-digit E-Code:
1. To program a 4-digit code, simply enter into the installer options
bank, then advance to the E-Code option. Once at the E-Code
option you can program your 4 digit E-Code.
2. To enter your choice for a code, push the override button the number
of times that correspond with the first digit of your code finalizing
with a push and hold (the hold counts as an entry). The system will
confirm acceptance of the code by chirping and flashing the LED
the number just programmed into the system. At this time, you can
repeat the step for the following 3 digits.
Example: If you desired code is 2345, push then push and hold for
digit 2, wait for system to chirp twice. Next push twice then push and
hold for digit 3, wait for system to chirp 3 times etc.
3. Once all 4 digits are entered to your satisfaction, either advance
back to the first installer option if necessary or exit programming. If
at any time during the code entry process you decide to exit the
process, the system will default back to its previously learned code
or the factory default.
Entering the 4-digit E-Code for overriding:
1. In a case that a remote control is lost and the system must be
overridden, the user will have to enter their previously programmed
4-digit code by using the ignition key and the hidden override
button.
2. To enter your first digit, turn the key to the ON position and push the
override button the number of times that correspond with the first
digit of your code then turn the key off.
3. Turn the key back to the ON position and push the override button
the number of times that correspond with the second digit of your
code and turn the key off.
4. Repeat this procedure until all 4 digits are entered, system will
disarm upon turning ignition off after 4th digit.
CA-130 install rev 7-04.pmd
7/28/2004, 3:32 PM
17
