Code Alarm CA 4055, Owner'S Manual

3

2017 Voxx Electronics Corporation. All rights reserved.

  Using Your Remote Starter

 Remote Starting Your Vehicle

  To activate the remote start function, press and release the 

 button 2 times within 2 

seconds.  The system will sound, the parking lights will flash 1 time and the system 

will check the vehicle to ensure it is safe to start.  If all safety parameters are correct, 

the vehicle will start.  The vehicle’s parking lights will turn on (or flash depending on 

system settings) as a visual indication that the vehicle has started and is running.  

If your vehicle stalls or does not start, the system will pause 5 seconds, then try 

3 more times to start the vehicle (a total of 4 attempts).  The system will pause 5 

seconds between each start attempt.

Note: 

This is the default configuration for remote start activation, the system can also 

be configured in option programming to remote start with a single press of the 

button.

 Remote Start Shutdown

  Press and hold the 

 button for 3 seconds to turn the vehicle off. Pressing the brake 

pedal will also shutdown the remote start. 

Note: 

The system can also be configured in option programming as a single or double 

press and release of the 

 button.

 Entering the Vehicle while it is Running via Remote Vehicle Start

1.    Unlock the vehicle’s doors.

2.   Enter the vehicle.  DO NOT PRESS THE BRAKE PEDAL!

3.   Insert the key into the ignition switch and turn to the ON or RUN    

   position.

4.    Press the brake pedal.  The remote start system will disengage and  

the vehicle will operate normally.

  Unlocking the Vehicle (optional)

To unlock the vehicle’s doors press and release the 

 button 2 times within 2 

seconds anytime the vehicle is remote started.

Note: The system can also be configured in option programming as a single press 

and release or a press and hold (for 3 seconds) of the 

 button.

Note: 

Additional parts and/or labor may be necessary, see your installing dealer for 

details.