Code Alarm CA 4055, Owner'S Manual

4

ca4055 Owners

 Preheating or Precooling the Vehicle’s interior

  Before exiting the vehicle, set the temperature controls to the desired setting and 

operation.  After the system starts the vehicle, the heater or air conditioner will 

activate and heat or cool the vehicle’s interior to your setting.

 Using the “Quick-stop” Feature

  If you want to make a short stop and keep your vehicle running (to keep the interior 

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle 

secure and your keys with you.

To engage Quick Stop:

1.    Stop the vehicle and place the transmission in PARK.

2.   With your foot off the brake pedal, press and release the 

 button 2  

times within 2 seconds. The LED will flash 3 times to confirm quick  

stop is entered.

3.    Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

Note:  

Do not leave children or animals unattended in the vehicle when using the  

quick-stop feature.

 Programmed Transmitter Notification - PTN

  As a security precaution each time the vehicle’s ignition is turn on the status LED 

light with flash the number of transmitters programmed into the system. This helps 

to identify unauthorized transmitters from accessing your vehicle. If you believe an 

unauthorized transmitter has been programmed to your system, contact your installing 

dealer for assistance.

 Valet Mode

When valet mode is activated the status LED will light solid and all remote start  

functions will be disabled. To enter or exit valet mode simply follow the steps    

outlined below:

1.   Turn the vehicle’s ignition ON.

2.   Push and hold the programming/valet button.

3.   The LED will turn on solid when valet mode is active

4.   Release the programming/valet button.