background image

11

2009 Audiovox Electronics Corporation. All rights reserved.

  Button Lock

Press and release    then press hold the   for 2 seconds to toggle the button lock
on or off.

  Illumination

Press and release     2 times then press and hold   for 2 seconds to toggle
illumination on or off.  When on, the display will illuminate when it receives or
sends a command.

  2 Car Mode

To control a second security system enter 2 car mode by pressing   then press 
and   together for 3 seconds. When the 

 icon appears on the transmitter’s LCD

screen it will control the second security system. Use the same method to exit 2
car mode and resume control of the original vehicle’s security system.

NOTE: A second security system must be installed and the LCD transmitter must be
learned to it before this feature will operate the additional system.

  Parking Meter Countdown

The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and release    then press and hold 

 for 2 seconds,

repeating this step to increase the countdown time.

  Adjusting the Clock and Timer Settings

The clock, alarm clock and programmable countdown timer are accessed through
the Function Menu. Press and hold   for 3 seconds to access the function menu,
once you have accessed the feature menu press and release   to scroll through
each feature and follow the steps below to adjust the settings for each. Press and
hold   for 2 seconds to exit the menu.

Clock Hour

Press 

 to increase or   to decrease

Clock Minute

Press 

 to increase or   to decrease

Alarm Clock Hour

Press 

 to increase or   to decrease

Alarm Clock Minute

Press 

 to increase or   to decrease

Alarm Clock ON / OFF

Press 

 to turn ON or   to turn OFF

Countdown Timer Hour

Press 

 to increase or   to decrease

Countdown Timer Minute

Press 

 to increase or   to decrease

Countdown Timer ON / OFF

Press 

 to turn ON or   to turn OFF

Summary of Contents for CA 6550



















Reviews: