3
CA1B5 / AS9234E 4280844 Owners rev A.
Remote Starting Your Vehicle
To activate the remote start, press and release the
button 2 times within 2
seconds. The vehicle will start and run the predetermined time set up during
installation (5 to 60 minutes selectable).
Remote Start Shutdown
To cancel the remote vehicle start function, press and release the
button 2 times
within 2 seconds.
Entering the Vehicle while it is Running via Remote Vehicle Start
1. Unlock the vehicle’s doors. (If equipped, press and release the
button
2 times within 2 seconds while the vehicle is remote started)
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or RUN
position.
4. Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.
Preheating or Precooling the Vehicle’s interior
Before exiting the vehicle, set the temperature controls to the desired setting and
operation. After the system starts the vehicle, the heater or air conditioner will
activate and heat or cool the vehicle’s interior to your setting.
Using Your Remote Control
Unlocking the Vehicle (optional)
During the run cycle, enter the vehicle using your door key or, if the unlock option is
installed, once you are within range of the vehicle, press and hold the transmitter
button for 3 seconds to unlock the vehicle doors.
