background image

3

2014 Voxx Electronics Corporation. All rights reserved.

  Using Your Remote Control

  

 Using the Keyless Entry

 The 

 button is used to lock the vehicle’s doors, the   button is used to unlock the 

vehicle’s doors. To lock or unlock the doors simply press and release the desired 

function button one time. For your convenience, the parking lights will flash once when 

the doors are unlocked and twice when the door are locked.

 

NOTE:

 The system is equipped with a feature called Silent Choice. If enabled, the 

system requires a second press of the 

 or 

 button to activate an audible locking/

unlocking response from the vehicle. If your system is set up for 2 step unlock, a third 

press of unlock will activate the audible response.

 

Using the Progressive Car Finder Feature

  Press the 

 button to locate your vehicle. The system will flash the parking lights 

and sound 5 times at low volume, increasing in volume each time the button is 

pressed.  

 

Using the Personal Protection Alarm (Panic)

  Press and hold the 

 button for 3 seconds to activate the personal protection alarm. 

During panic mode, the normal function of the transmitter buttons will be suspended. 

The transmitter’s 

 and 

 buttons can be used to lock and unlock the door (if the 

option is installed). To stop the alarm, press and hold the 

 button on the transmitter 

again for 3 seconds. The system will automatically stop after 30 seconds.

 Activating the Trunk Release Feature (Optional)

  The  

  button is used to open the trunk of the vehicle. To open the vehicle’s trunk 

press and hold the     button for 3 seconds.

 

Two Stage Door Unlock (Optional)

 

If this feature is enabled on your system, pressing the    button one time will unlock 

only the driver’s door. Press   again within three seconds to unlock the remaining 

doors.

 

Activating AUX 1 (Optional)

  If this feature is enabled on your system, pressing the 

 and   buttons 

simultaneously will activate an optional feature. This feature can be programmed for a 

wide range of functions like power window or sunroof automation, please consult your 

installing dealer to determine the functionality of your system.

Summary of Contents for ca5554 Professional series

















Reviews: