background image

8

ca5554 Owners rev A

 

Remote Start Safety Features

 

For safety and security reasons, the system will shutdown or prevent the remote 

vehicle starter from activating if any of the following occur:

   

1.  The vehicle hood is open.

   

2.  The brake pedal is pressed prior to turning the ignition key to the ON  

   position.

   

3.  The engine is over-revved (tach checking only).

   

4.  Valet mode is active.

 

Temperature Start Mode

  The system has the ability to start the vehicle if the temperature drops below a preset 

temperature threshold. Once activated, the system will only start the vehicle one time 

based on the temperature setting and will be cancelled if the vehicle is started with the 

key or remote started by the transmitter. Temperature is read from the module, located 

below the dashboard in most instances, and the vehicle’s interior temperature may 

vary from the ambient temperature.

   

1.   The vehicle must be armed.

   

2.   Press and release both the  

  & 

  buttons together.

   

3.   The vehicle will emit 1 chirp and flash the parking lights 1 time. 

  Note:  This feature is defaulted OFF and must be set in option programming.

Summary of Contents for ca5554 Professional series

















Reviews: