8
Automatic Convenience Options
The Power Code PC 7500
TM
performs a variety of automatic functions to
enhance security and comfort. Some of these features are programmable
at the time of installation. Please see your installer for further details.
Illuminated Entry
When the alarm system is disarmed, the vehicle courtesy lights will turn
on for 1 minute, or until the vehicle is started or the system is re-armed.
Illuminated Exit
When removing the key from the ignition, the vehicle courtesy lights
will turn on for 1 minute, or until the Power Code PC 7500
TM
is armed.
Automatic Arming
The Power Code PC 7500
TM
will arm automatically 1 minute after the
key is removed from the ignition. This feature can be temporarily
disabled by placing the system into Valet mode.
Ignition Lock
If all doors are closed and the vehicle is started with the key, the doors
will automatically lock.
Ignition Unlock
When removing the key from the ignition, the doors will automatically unlock.
When Your Security System is Triggered
The Power Code PC 7500
TM
will trigger if one of the following events
occurs while the system is armed:
• Any protected entrance is opened
• The vehicle ignition is turned on
• The vehicle is jolted hard enough to signal the impact detector
Once the alarm is triggered, the siren (or horn) sounds and the vehicle
parking lights flash for 30 seconds. The system will then re-arm, awaiting the
next intrusion attempt. To stop the siren while keeping the alarm armed
and doors locked, press the ARM button while the system is triggered.
The Interior Status Indicator
The Status Indicator is a high-intensity red light mounted in a visible
location on the vehicle dashboard. This red light gives a visual indication
of the alarm system’s state of operation. Note the chart below:
If the Status Indicator is...
....then the Security System
Flashing Green
is disarmed
Flashing Slowly
is armed
Flashing Very Quickly
was triggered in your absence
(see Attempted Intrusion ID - page 4)
Flashing Intermittently
is in Valet mode(LED is Green)
(2 flashes, off, 2 flashes)
On (not flashing)
is in Pre-arm mode
Summary of Contents for PC 7500
Page 16: ...16 ...
