15
After alarm has been triggered and the 30-second cycle has
elapsed, pressing DISARM will sound 4 chirps to indicate an
intrusion. Enter vehicle and press the override button once to
determine which input triggered the alarm.
Horn pulses (or siren sounds) a number of times to indicate which
input triggered the alarm:
Number of Chirps:
1 - Interior Theft Sensor
2 -Door input
3 - Hood Input
4 - Trunk input/External Sensor
5 - Ignition
If Passive Arm option is set to On:
System will arm 60 seconds after key is turned off.
Press DISARM
1. Doors unlock
2. Factory alarm (if equipped) is turned off.
3. Horn/siren sounds once* / parking lights flash once.
4. Vehicle starter is enabled.
5. LED turns off (if alarm was triggered, LED will flash quickly).
Press DISARM twice
1.
*
If ARM / DISARM Verification is set to manual, horn (or siren)
sounds once.
2. Passenger doors unlock if using 2-stage unlock.
Press and hold PANIC for 1 second
Horn pulses (or siren sounds), lights flash for 30 seconds or until
any remote control button is pressed.
Press and hold TRUNK
Trunk or hatch opens, or other device activates AS LONG AS
BUTTON IS HELD.
If Ignition Lock option is set to On:
Doors lock when all doors are closed and key is turned to
ON position.
If Ignition Unlock option is set to On:
Doors unlock when ignition is turned off.
VALET MODE
Press ARM/LIGHTS with vehicle ignition On
System enters Valet mode, LED double-blinks.
Press DISARM/TRUNK with vehicle ignition On
System exits Valet mode, LED turns off.
3. System Testing
