C005905_04_CR1000_User_Manual
11.0 - Reader ID and Firmware Version
Reader ID and Firmware
iVVVVWWWWXXXXSSSSSSSSSSAOODYYYYHHIIIIJJJJKKKKLLLL<TAB>Z…Z
5
To find out the Reader ID and firmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the
following code:
You will see a text string indicating your firmware version and CR1000 ID number (see below):
i
indicates ‘I’ string output;
VVVV is the application firmware version number;
WWWW is the core application firmware version number;
XXXX
is reserved for the radio firmware version number;
SSSSSSSSSS is the Reader’s serial number (ten digits);
A is the current execution state:
OO is the OEM identifier;
D is the display type:
YYYY is the flash file system version number. Reserved;
HH is the hardware revision;
IIII is the hardware type identifier: 0007 indicates a CR1000
JJJJ is the boot application version;
KKKK is the operating system kernel version;
LLLL is the root file-system version;
<TAB> is the ASCII TAB character;
Z…Z is the OEM decoder version: a null terminated string of printable ASCII characters. Without a decoder.ini file,
the order of the decoders listed here indicates the order of use.
Example:
Xap/i3000300006040010002363A06D-SD+SQ
Note:
Code will periodically release new firmware for CR1000 readers. For information on latest firmware versions,
call Code
at (801) 495-2200. To upgrade firmware, please visit our website at
http://www.codecorp.com/
codesupport.php
and follow instructions provided.
“0” or “N” is no display device
“D” is the standard Keypad/Display
“A” means core is running
“B” means undefined
“C” means undefined
