18
C005383_10 CR80XX Integration Guide
4.13 – Ribbon Cable Diagram (Decode Board to Host Interface on CR8011 and CR8012)
Our Ribbon Cables have the following characteristics:
1:
Bottom contact on CR8000 mating end
2:
12 pin
3:
0.5 mm pitch
4:
0.3 mm thickness with stiffener
Our Ribbon Cables have contacts on the same side of each end. Please
take this into account with respect to the control signals when designing the
mating connector pinout on the host interface.
The Development Kits, CR80XX-DKX, use a Ribbon Cable with opposite
side contacts.
3.3V operation of the CR8000 is only possible with 6.0" or
shorter Ribbon Cable.
Three Ribbon Cables are available with the following SKUs and lengths:
SKU
Length
C800
50.8 mm (2.0")
C801
152.4 mm (6.0")
C802
304.8 mm (12.0")
4.12 – Flex Cable Diagram (Imager Board to Decoder Board on All Models)
(continued)
52.30
[2.050]
9.00
[.354]
9.00
[.354]
17.90
[.704]
5.00
[.196]
UNITS = MM [INCHES]
In-line (Centerline) Flex
29.00
[1.141]
9.00
[.354]
17.57
[.691]
7.57
[.298]
9.00
[.354]
19.00
[.748]
Reverse Flex
.305
[.012]
CABLE LENGTH
6.00
[.236]
3.556
[.14]
.50
[.020]
.356
[.014]
6.50
[.256]
5.50
[.217]
.28
[.011]
UNITS = MM [INCHES]
