Set / Change / Delete the Sub-Master and User Code
Select between repeated use and single use codes
Restrict the locked time
Sub-Master Code can:
Open the lock
Change the Sub-Master
Set / Change / Delete the User Code
User Code can:
Open the lock
Change the User Code
A code cannot be programmed into more than one level
Lost Code procedure
Note:
The procedure require the door to be open
Remove the rear-fixing bolts and and remove the lock from the door.
Remove one battery.
Press and hold the 1 button, replace the battery, the blue LED will flash twice, release the
1 button. Within three seconds press the 1 button three times. The blue LED will flash
twice and the lock will have reverted to the factory Master Code 11 33 55 77 and all
other stored settings will be erased.
Penalty Time
Entering three incorrect codes will cause the lock into shutdown for 10 seconds.
Battery Power
The Cabinet Lock should provide well in excess of 40,000 openings of 4 seconds each, from 2 x
AAA 1.5v cells.
Low Battery
When the battery power is low the Red LED will flash 3 times before the Blue LED flashes to
signal acceptance of the code. Batteries should be changed as soon as this happens.
The lock will operate for 100 times with low battery.
Battery failure override