CFAST 2.0 CARD READER - GETTING STARTED GUIDE - v20140506
PAGE 2
Safety Warnings
Please observe any warnings and follow all instructions.
l
Do not use this equipment near water and clean only with a dry cloth.
l
Install in accordance with the manufacturer’s instructions.
l
Do not install near any heat sources such as radiators, heat registers, stoves, or other equipment (including
amplifiers) that produce heat.
l
Do not expose to excessive vibration, or drop this product.
l
Protect the cable from being walked on or pinched, particularly at plug ends.
l
Unplug this equipment during lightning storms or when not in operation for long periods of time.
l
Refer all servicing to qualified service personnel. Servicing is required when the equipment has been
damaged in any way, such as connector damage, if liquid has been spilled or objects have fallen into the
equipment, it has been exposed to rain or moisture, does not operate normally, or has been dropped.
l
To reduce the risk of fire or electric shock, do not expose equipment to rain or moisture.
l
To avoid electrical shock, do not attempt to open this equipment. Refer servicing to qualified personnel only.
Caution! The surfaces of CFast 2.0 media can get hot during standard use.
Disclaimer
Codex products are continually developed to remain at the forefront of the industry, and as such the information
in this guide is subject to change without notice. Whilst Codex endeavour to ensure that all documentation
provided is correct at the time of writing, this document is not guaranteed to be error-free.
Codex does not assume responsibility for issues or losses due to misinterpretation of the information in this
document, errors in this document, or incorrect configuration or installation of the equipment described herein.
Please report any errors found in this document to
support@codexdigital.com
Support and Servicing
For assistance with your CFast 2.0 Card Reader please contact
support@codexdigital.com
