•
If the device is smoking or making unusual sounds, power off and unplug the device
immediately.
•
Do not insert foreign objects of any kind into the device; doing so can constitute a safety
hazard and cause extensive damage.
•
Do not place any liquid containers on the device. If, for some reason, liquid seeps into the
device, power off the device and unplug the power cord from the source outlet. If used
without corrective measures, the device may be damaged.
•
Do not use the device near flammable gases.
•
Connect only Codonics-approved devices.
Location Precautions
•
The device’s operating ambient temperature range is 15–30ºC (59–86ºF), with a relative
humidity of 20%
–80%.
•
If the device is moved quickly from an extremely cold place to a warmer one,
condensation is likely to form. Do not use the device if condensation has formed. Wait
until the condensation has evaporated. You can speed up the evaporation time by
moving the device to a drier location.
•
Ventilation slots and holes are provided on the sides and rear of the device. Place the
device on a level, stable surface and locate it at least 10 cm (4 in.) from walls to ensure
proper ventilation.
WARNING:
Adequate ventilation is required for proper operation of the device.
•
Do not place device in a high humidity or high dust area. Airborne dirt particles can cause
interference with the operation of the device. Avoid placing the device in areas where
ventilation ducts, open doors, or frequent passers-by might expose the device and media
to high levels of debris.
•
Do not locate the device in hot-springs areas where hydrogen sulfide and acidic ions are
likely to be generated.
•
Do not locate the device where there are oily fumes and vapors.
•
Do not locate the device in direct sunlight.
•
Do not locate device near sources of high RF energy.
•
Do not locate the device where it might be subject to jarring or vibrations, such as a table
or desk in a high-traffic area. Jarring and vibrations can affect the recording and labeling
of discs.
