4) Press the
+
or
-
buttons; the display will show
SPEc
(for special) which corre-
sponds to the proportional selection of colours on the colour wheel (split colours
are possible)
5) Press the
enter
button after either step 3 or step 4 to confirm your choice of
colour selection.
tESt
This function allows for a test sequence to be carried out on the respective motors of
the unit in the absence of any
DMX
signal.
1) Press the
menu
button.
2) Press the
+
or
-
until
tESt
(for test) is displayed.
3) Press the
enter
button to confirm your selection. The display will show
t 01
(for
test number 1). Press the
+
or
-
buttons for each test
t 01
to
t 12
In these tests, the projector simulates the reception of a DMX 512 signal which is
increasing from 1 to 255 on the selected channel.
t 01
= movement in the X-axis
t 02
= fine movement in the X-axis
t 03
= movement in the Y-axis
t 04
= fine movement in the Y-axis
t 05
= opening/closing of the iris diaphragm
t 06
= opening/closing the black-out/strobe shutter
t 07
= opening/closing the frost filter
t 08
= rotating the effects wheel 1
t 09
= rotating the colour wheel 1
t 10
= rotating the cyan dichroic
t 11
= rotating the magenta dichroic
t 12
= rotating the yellow dichroic
t 13
= no effect
4) Press the
enter
button to confirm your selection of test to be carried out.
function display
menu
+
-
enter
function display
menu
+
-
enter
function display
menu
+
-
enter
