English
19
8.1.1.3 Main function menu (FUNC)
The projector gives the opportunity to change and customize some functional settings.
FUNC
DIMM.
Dimmer mode: it can simulate dimmer effect with Tungsten or Xenon
lamp.
TUNG
XENO
ID
It allows to set the ID number of the unit by + and – keys; “enter” key to confirm.
Da 1 a n°
It allows to choose the primary colors and to emulate classic CMY
in a wide gamut without DMX signal.
It allows to vary the channel of white on several color temperatures
from 3200 °K to 9000 °K, without DMX signal.
See diagram below.
RGB
CMY
COLR
It allows to turn on the primary colors
without DMX signal.
STORE saves settings for the next
turning on of the projector.
WHTE
GREE/MAG
BLUE/YELL
STRB
RED/CYAN
STORE
TEST
0 - 255
0 - 255
D.MAX
RESE
DFSE
Disables the adjusting of the leds setting them at maximum output.
It permits the reset of the unit. Keeping pressed ENTER and MENU at the
turning on of the unit It allows to access SPECIAL MODE features.
It restores all the settings at default value excepting of led settings and hour
meter.
ON
OFF
enter
SURE
LED
AUTO allows to turn off the display after 6 seconds
AUTO
ON
DISP
It allows to turn 180° the reading of the display. HOLD
locks the keys. Press any key for 5” to
unlock.
RVRS
HOLD
AA/VV
ON/OFF
8 CH
DMX
It allows to select the functioning mote at 8 DMX channels without
shade or the extended functioning at 12 channels with selection and
mixing of the shades. The 4 channel features allows to let the
projector to work only with RGB+W channels without dimmer.
4 CH
1 CH
It allows to use only the color chosen by dmx and the dimmer.
12 CH
Summary of Contents for Reflection LEDko
Page 1: ...Instruction manual Manuale di istruzioni Version 1 0 DIS139 ...
Page 30: ......
