Italiano
21
LED alignment:
This item allows to align the minimum
and the maximum level of intensity of the
LEDs:
• Minimum:
raise or lowers the mini-
mum intensity to level the dimming
between the fixtures;
• Maximum:
aligns the maximum out-
put level between each fixture;
• Exit:
exits the menu and stores the
changes;
Reset hours:
Allows to erase the hours of operation of
the LED module in case of replacement;
ALIG
[LED Alignment]
SURE
[Are you sure?]
R.HRS
[Reset LED Hours]
MIN
[Minimum]
MAX
[Maximum]
EXIT
[Exit]
EXIT
[Exit]
Warning!!
This chapter should be considered for the exclusive use of technicians and qualified personnel.
9.6
Electronic alignment of the leds
The display panel of
ReLite Led Kit
allows the electronic alignment of the LEDs, this procedure
is performed by
Coemar
at the time of testing, this procedure may be useful for special effects
or in case of replacement of internal components (PCBs, LEDs, etc...).
Altering the settings made by
Coemar
may radically alter the operation of the projector’s func-
tions. Carefully read the following prior to attempting any changes.
Warning!!
This menu can only accessed in the
DF.SE.
[Default Settings] menu by pressing at the
same time
ENTER
and
MENU
buttons. This menu shall be accessed only by authorized
technicians.
