Italiano
19
LED alignment:
This item allows to align the minimum and the
maximum level of intensity of the LEDs:
• Minimum:
raise or lowers the minimum in-
tensity to level the dimming between the
fixtures;
• Maximum:
aligns the maximum output lev-
el between each fixture;
• Exit:
exits the menu and stores the changes;
Reset hours:
Allows to erase the hours of operation of the
LED module in case of replacement;
ALIG
[LED Alignment]
SURE
[Are you sure?]
R.HRS
[Reset LED Hours]
MIN
[Minimum]
MAX
[Maximum]
EXIT
[Exit]
EXIT
[Exit]
Warning!!
This chapter should be considered for the exclusive use of technicians and qualified personnel.
9.6
Electronic alignment of the leds
The display panel of
ReLite Led Kit
allows the electronic alignment of the LEDs, this procedure is performed
by
Coemar
at the time of testing, this procedure may be useful for special effects or in case of replacement of
internal components (PCBs, LEDs, etc...).
Altering the settings made by
Coemar
may radically alter the operation of the projector’s functions. Carefully
read the following prior to attempting any changes.
Warning!!
This menu can only accessed in the
DF.SE.
[Default Settings] menu by pressing at the same time
ENTER
and
MENU
buttons. This menu shall be accessed only by authorized technicians.
Summary of Contents for ReLite Led Kit T / D
Page 1: ...ReLite Led Kit T D ReLite Led Kit 150 version ...
Page 22: ...Italiano 22 User notes ...
Page 23: ...Italiano 23 User notes ...
