Coemar ReLite Led Kit T / D, Manual

Italiano

4

Congratulations on having purchased a 

Coemar

 product. You have assured yourself of a fixture of the highest 

quality, both in componentry and in the technology used. We renew our invitation to you to complete the service 

information on the previous page, to expedite any request for service information or spares (in case of problems 

encountered either during, or subsequent to, installation). This information will assist in providing prompt and ac-

curate advice from your 

Coemar

 service centre. Following the instructions and procedures outlined in this manual 

will ensure the maximum efficiency of this product for years to come.

1. 

Packaging and transportation

1.1 

Packaging

Open the packaging and make sure that no part of the equipment has suffered any damage during the transpor-

tation. In case of damage to the fixture, contact your currier and your supplier immediately by telephone, fax or 

e-mail, and inform them you will formally notify them in writing through registered letter.

Packing list

Make sure the packaging contains:

1 ReLite Led Kit

1 Instruction manual 

2

. General information

2.1 

Important Safety information

Fire prevention:

1. 

Never locate the fixture on any flammable surface.

2. 

Minimum distance from flammable materials: 0,5 m.

3. 

Minimum distance from the closet illuminable surface: 0,5 m.

4. 

Replace any blown or damaged fuse only with those of identical values.   

Refer to the schematic diagram if there is any doubt.

5. 

Connect the projector, where the 

ReLite Led Kit

 is installed, to mains power protected by 

a thermal magnetic circuit breaker.

Prevention from electric shock:

1. 

Presence of high voltage inside of the fixture. Insulate the fixture from mains supply be-

fore opening or performing any function which involves touching the inside of the fixture, 

including lamp replacement.

2. 

For the connection to the mains, adhere strictly to the guidelines outlined in this manual.

1.2

Transportation

The 

ReLite Led Kit 

must be transported exclusively in its original packaging.