15
BRILLIANCE 3.0
CLEANING AND CARE
Weekly Cleaning
02
01
03
04
Reassemble mixing system
All parts must be dry before reassembly.
A
Wash these parts
Mixing bowl
Condensation trap
Mounting plate
Whipper
Clean with a moist
cloth and wipe dry.
The flat side of the whipper shaft must correspond with the
marked arrow on the whipper.
To fit the whipper push onto the shaft until a click sound can be
heard. It is only possible to assemble the whipper in one way.
Fix the mixing bowl and condensation trap. Push-fit the mixing
bowl and fix with lever.
Connect the outlet hose.
Ensure that all water hoses have been
connected and fitted.
Check all seals (red) before
reassembly of parts.
Note
Summary of Contents for BRILLIANCE 3.0
