33
BRILLIANCE 3.0
Recipe explanation
PROGRAMMING
Before Coffe 1
Before Solubile
Coffee Water Vol.
key 1 ↑## ↓cc
Before Coffe 1
After Solubile
Time 1 Water 1
Key 1 ↑## ↓s.
Pause Water 1
Key 1 ↑## ↓s.
Time 2 Water 1
Key 1 ↑## ↓s.
Press
K5
/
K1
This section will explain how to change specific settings for drink 1.
Same explanations will then apply to all buttons (1-8).
To see the machines default settings for all buttons, please refer to
page 58.
The first adjustment available is the “Coffee Water Vol.”. With it the
volume of water pumped to brew the espresso is set. With “+” and “
- ”, the volume is adjusted. With “enter” the quantity set is accepted,
and next parameter will be shown on the screen. The volume is
measured in Cubic centimeters.
Accordingly to this setting, during normal service of the machine,
when button 1 is selected, the machine will automatically grind the
needed beans of coffee, and brew the espresso with the set volume
of water. If the quantity is set to 0, no espresso will be brewed on
the selection, neither grinding will be performed.
Next setting, will adjust if the brewing of the espresso will be done
before, or after having brewed the part of instant drinks. One or
the other option can be set by pressing “+” or “-“.With “enter” the
selection set is accepted, and next parameter will be shown on the
screen.
Now it comes the time to set the water times for the instant drinks
brewed on the mixer. These times set the quantity of water used to
brew the selection. With buttons “+” and “-“ we adjust the times;
with “enter” we accept the set times, and proceed to the next
adjustment. The Time 1, sets the time to get the main quantity of
water for the brewing; the time 2, adjust the amount of water to
flush the mixer clean. Between them the pause can be adjusted with
the time for “Pause Water 1”. The amount of water set here will be
mixed with the instant powders set in following parameters.
Time 1 Water 1 Pause Water1 Time 2 Water1
Water1
Press
K6
Press
K6
Press
K6
Press
K6
Press
K6
Press
K6
Press
K6
K2
K2
K2
Summary of Contents for BRILLIANCE 3.0
