12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
10
.
4. SERVICE:
Installation and start.
Excellence
Connecting of water to machine, (over cabinet)..
6.
Connect attached water hose to cold water with an R 1/2”.
Make sure that the water hose not are kinked anywhere when machine is pushed
into place.
Please flush the water hose before connecting to machine, this to avoid any
particles to destroy the inlet valve.
7.
.
Open the water inlet.
8.
Turn on the switch inside the door.
Water is been filled into the tank
automatically with 2,4 litres of water.
The heating will not start before the water
level reaches the level sensor.
9.
Close door.
Set temperature is approx. 97ºC.
ON / OFF
switch
ON / OFF
switch
10.
When the water is heated
to right
temperature. The message
”please wait”
will disappear.
Please wait”
11.
Turn off the machine.