![background image](http://html.mh-extra.com/html/coffee-queen/mocca-btb/mocca-btb_service-manual_2634484006.webp)
6
.
4. Service.
Installation and start
MOCCA BTB
1.
Place the brewer on a flat
level and waterproof surface.
Connect the electrical plug to a separate
grounded wall socket
OBSERVE!
Make sure there is a space behind the
machine for free flow of air.( minimum 10cm ).
2.
Connect attached water tube to cold water with an R 1/2”.
Make sure that the water hose not are kinked anywhere when machine is
pushed into place.
Please flush the water tube before connecting to machine, this to avoid any particles to
damage the inlet valve.
3.
Open the water inlet.
4.
Turn on the ON-OFF switch
Water is been filled into the tank automatically with
2,0 litres of water. The heating will not start before
the water level reaches the level sensor.
Set temperature is approx 97ºC.
5.
Close door.
90º
ON/OFF
switch
Fuse holder