17
Country Club Road
P.O. Box 779
Wadesboro, NC 28170 USA
TEL: (800) 477-5003
FAX: (800) 374-6853
INSPECTOR’S REPORT
ITEM
REMARKS (LIST DEFICIENCIES AND RECOMMENDED ACTION)
Inspector’s
Date
Signature
Inspected
Approved by
Date
Figure 10B — Recommended Inspector’s Report
NOTE: All bearings except hook and idler sheave bearings are prelubricated and sealed.
(*) This lubrication schedule is based on a hoist operating in normal environment conditions. Hoists operating in adverse
atmospheres containing excessive heat, corrosive fumes or vapors, abrasive dust, etc., should be lubricated more frequently.
Figure 11 — Recommended Lubrication Schedule
RECOMMENDED LUBRICATION SCHEDULE*
COFFING ELECTRIC POWERED CHAIN HOIST
PAGE AND
COMPONENT
TYPE OF LUBRICANT
TYPE OF SERVICE AND
REFERENCE NO.
FREQUENCY OF LUBRICATION
HEAVY
NORMAL
INFREQUENT
Pages 32 & 33
Load Chain
SAE 90 gear oil
Daily
Weekly
Monthly
Ref. No. 8
Pages 30 & 31
Gearing
SAE 90 extreme pressure (EP) gear oil
At periodic inspection (see Figure 10A)
Pages 28 & 29
Limit Switch Shaft
Multi-purpose oil or
Monthly
Yearly
Yearly
Ref. Nos. 9 & 7
general purpose spray
Pages 32 & 33
Ref. No. 18, 30
Load Hook Bearing
SAE 30 gear oil or motor oil
Weekly
Monthly
Yearly
Pages 32 & 33
Idler Sheave Bearing
Multi-purpose lithium
At periodic inspection (see Figure 10A)
Ref. No. 27
(Bushing) Assembly
base bearing grease - NLGI #2
For more information contact: Sievert Crane and Hoist, (708) 771-1600, parts@sievertelectric.com, www.sievertcrane.com
