36
CHAPTER 3
®
Note: the Real Value can be read by the printer for data recording by setting the “Real
Tubes” parameter in the “10.2 Credit Reading” menu item.
3.1.2.2 Pieces
It is the number of coins present in the tubes.
3.1.2.3 Total Value
The data, expressed in currency, is the whole value of the coins destined to the tubes. In
the Partial Totals (“3.1 Partial Totals” submenu) at the end of each data recording (by
means of Data-Key, E.C.S. CL RS232 Key, IR PORT Module or Comunica Module) a reset will
be carried out; the Cumulated Totals, instead, will not be reset (see also “10.3.3
Automatic Delete” menu item). In the total are not counted the coins manually loaded in
the tubes.
3.1.2.4 Manual Charge
The data is the whole total, expressed in currency, of the coins loaded in the tubes of the
Coin Mechanism, in the three modes described at para. 2.1.7 “Tube loading”.
3.1.2.5-9 Taking Tube 1-5
The information described so far is reported in detail for each tube:
•
3.1.2.5-9.1 Value;
•
3.1.2.5-9.2 Pieces;
•
3.1.2.5-9.3 Total Value;
•
3.1.2.5-9.4 Manual Charge;
•
3.1.2.5-9.5 Correction.
The first four items of each submenu refer to the same descriptions of the “3.1.2 Tube
Takings” menu, according to the specified selected tube.
3.1.2.5-9.5 Correction
When the tube emptying is carried out till the minum level (see menu "2 Diagnostics"),
the Coin Mechanism compares the number of coins present with the counter one. If the
difference is null, it means that all the operations have been carried out perfectly; if
there are differences it means that some coins may have been loaded or unloaded
manually inside the tube without recording them in the “1.1 Set Quantity” menu item.
The data results to be
negative
when for the tube emptying was not used the “2.2.3-
2.2.7 Empty Tube 1-5” menu item, but the coins have been manually unloaded from the
tube box without recording the operation in the “1.1 Set Quantity” menu item.
The data results to be
positive
when some coins have been manually loaded in the tubes
and the “1.1 Set Quantity” or the “1.2 Preset Amount” menu items were not updated.
To prevent this problem we suggest to make the tube loading with the automatic modes
foreseen by the Coin Mechanism: the “Loading from the coin inlet channel” mode or the
“Loading by using the assisted loading function” mode as described in chapter 2 (see
para. 2.1.7. “Tube loading”).
3.1.3 Total Sold
This menu reports the accounting data referred to the cash or key sales of the vending
machine and it foresees the following items:
•
3.1.3.1 Cash Sale;
•
3.1.3.2 No. Sales;
•
3.1.3.3 Sold by Key;
•
3.1.3.5 Sold in EA;
•
3.1.3.6-15 Line 1-10.
