Specifications
The following sections list general specifications for the In-Sight Micro vision systems.
In-Sight Micro Vision System Specifications
Specifications 1020/1050 1100/1110 1100C 1400/1410 1400C
1402/1412 1403/1413 1403C
1500
Minimum
Firmware
Requirement
In-Sight version 4.4.3
In-Sight
version
4.6.0
In-Sight version
4.4.3
In-Sight
version 4.9.1
Job/Program
Memory
128MB non-volatile flash memory; unlimited storage using a remote network device.
Image
Processing
Memory
256MB SDRAM
Sensor Type
1/3-inch CCD
1/1.8-inch
CMOS
1/1.8-inch CCD
1/1.8-inch
CMOS
Sensor
Properties
5.92mm diagonal, 7.4 x 7.4µm sq. pixels
8.7mm
diagonal,
5.3 x 5.3µm
sq. pixels
8.8mm diagonal,
4.4 x 4.4µm sq.
pixels
8.7mm
diagonal, 5.3
x 5.3µm sq.
pixels
Maximum
Resolution
(pixels)
1
640 x 480
1280 x
1024
1600 x 1200
640 x 480
800 x 600
2
Electronic
Shutter Speed
16µs to 1000ms
16µs to
950ms
52µs to 1000ms
640 x 480:
4µs to 500ms
800 x 600:
5µs to 500ms
Acquisition
Rapid reset, progressive scan, full-frame integration.
Bit Depth
256 grey levels (8
bits/pixel)
24-bit
color
256 grey
levels (8
bits/pixel)
24-bit
color
256 grey levels (8
bits/pixel)
24-bit
color
256 grey
levels (8
bits/pixel)
Frames Per
Second
3
60 full frames per
second
58 full
frames
per
second
60 full
frames per
second
58 full
frames
per
second
60 full
frames per
second
14 full
frames per
second
7 full
frames
per
second
640 x 480
resolution:
213 full
frames per
second
800 x 600
resolution:
157 full
frames per
second
Lens Type
CS-mount and C-mount (with 5mm extension, included).
Trigger
1 opto-isolated, acquisition trigger input. Remote software commands via Ethernet. (RS-232C
available when using the optional CIO-MICRO or CIO-MICRO-CC I/O module.)
1
You can configure the number of image sensor rows and set them in the In-Sight Explorer software. If you decrease the number of rows, it
increases the frames per second acquired by the vision system. Refer to the AcquireImage topic in the
In-Sight
®
Explorer Help
file for more
information.
2
The default resolution for the In-Sight Micro 1500 vision system is 640 x 480 pixels. The vision system's resolution can be configured as 800 x
600 pixels within the In-Sight Explorer software. Refer to the
In-Sight
®
Explorer Help
file for more information.
3
Maximum frames per second are job-dependent, based on the minimum exposure for a full image frame capture using the dedicated
acquisition trigger, and assumes there is no user interface connection to the vision system.
18
Specifications
