Installation
Read this section to learn how the vision system connects to its standard components and accessories. For a list of
options and accessories, contact your Cognex sales representative.
Note
:
l
Cables are sold separately.
l
If a standard component is missing or damaged, immediately contact your Cognex Authorized Service
Provider (ASP) or Cognex Technical Support.
Connectors and Indicators
Connector/Indicator
Function
I/O Connector
Provides connections to the acquisition trigger input and high-speed outputs.
PoE Connector
Provides the Ethernet connection for network communications and supplies power
to the vision system.
LED1
Green when active. User-configurable using Discrete Output Line 4 (Line 10 when
using the CIO-MICRO or CIO-MICRO-CC I/O module).
LED2
Red when active. User-configurable using Discrete Output Line 5 (Line 11 when
using the CIO-MICRO or CIO-MICRO-CC I/O module).
ENET
100-BaseT: Red when the vision system is receiving power during startup,
momentarily switches to green when a network connection is established, and
then blinks green when network traffic is detected. If a network connection cannot
be established, the LED remains red.
10-BaseT: Red when the vision system is receiving power during startup,
momentarily switches to green when a network connection is established. The
LED is solid green with red blinking when network traffic is detected. If a network
connection cannot be established, the LED remains red.
10
Installation
