1
PRECAUTIONS REGARDING WARRANTY AND
SPECIFICATIONS
Code readers are designed and manufactured by Cognex Corporation. Note that the warranty and general specifications of
code readers differ from that of programmable controller products.
• Warranty
• General specifications
*1 Do not install it in the following places:
⋅
Where the ambient temperature or humidity exceed the applicable ranges
⋅
Where condensation occurs due to sudden temperature changes
⋅
Where there is corrosive or flammable gas
⋅
Where there are a lot of conductible dust, iron filings, or salt
⋅
Where in danger of organic solvents, such as benzene, thinner, and alcohol or strong alkaline substances such as caustic soda to
adhere
⋅
Where subject to much vibration or shock
⋅
Where in danger of liquid such as water, oil, or chemicals to adhere
Item
Code reader
Programmable controller product (Example: MELSEC iQ-R
series)
Free warranty period
18 months after delivery or 24 months
after manufacture
36 months after delivery or 42 months after manufacture
Repair period after discontinuation of
manufacture
7 years
7 years
Item
Specifications
Programmable controller product (Example:
MELSEC iQ-R series)
Ambient operating
temperature
0 to 40
0 to 55
Ambient storage temperature
-10 to 60
-25 to 75
Maximum humidity
Less than 95% RH, non-condensing
Vibration resistance
IEC 60068-2-6: A vibration of 10 G (10 to 500 Hz at 100 m/
with 15 mm width) was applied to each of the three main axes
for 2 hours.
• Frequency: 5 to 8.4Hz
• Half amplitude: 3.5mm
(10 times each in X, Y, and Z directions)
Shock resistance
IEC 60068-2-27: 1000 half sinusoidal shocks with 11 G (10
ms) were applied.
JIS: 147m/
(3 times each in X, Y, and Z directions)
Protective structure
IP65
Installation location
Outside a control panel
Inside a control panel
Summary of Contents for Mitsubishi Electric MELSENSOR CF26 Series
