Follow These Steps to Set Up the C Series Printer:
4
1
2
3
To Get Started:
Helpful Web Links and Contact Information:
Please refer to the User’s Guide on the CognitiveTPG Website
for full details on setting up and using the C Series printer.
Internet Users
Go online to: http://www.CognitiveTPG.com and register your
C-Series printer under “Warranty Registration.” Access and
download the latest utility, drivers, and documentation.
Non-Internet Users
Call 800-732-8950, ext. 2474, to request a set-up CD-ROM.
To learn more about CognitiveTPG approved media, please check out our new Online Media Selection Tool.
For C Series technical support, please contact your local reseller or CognitiveTPG toll free at 800-732-8950, option 4,
direct at 607-274-2500, option 4, or email support@CognitiveTPG.com.
Unpack the Printer:
Remove the following contents from the Box:
1. The C Series Printer
2. Power Supply Kit including
• Power Cord
• Power Supply
3. The Accessory Box including
• Spindle
• USB Cable
• Sample Media Kit
• Documentation
Connecting Power to the C Series Printer
Plug power supply to power source and a green LED will illuminate on the power supply.
NOTE:
Do NOT power the printer on until instructed.
1
2
&
Printer Power Test:
1. Press the Power Connector (D) to the ON position.
NOTE:
Power Light (A) on top user interface cover will
turn green to indicate unit is receiving power. Ready
Light (B) will first turn red, then auburn, then green
once printer is ready to print.
Cxi Printers Only: LCD display will briefly state Press
Right Arrow for Menu for about 1 second. Then
display will read Cognitive Cxi for about 1 second.
Once printer is ready to print, display will read
COGNITIVE (see Cxi Only image left).
2. Press Power Switch (D) to OFF before proceeding to
next steps.
CXi Only
