Loading Media -- Standard Size Rolls:
NOTE:
Before proceeding to Step 1, open the printer cover. Then follow Steps 2a or 2b depending on the media type
being used.
1
2a
2b
Inward Wound Media
Outward Wound Media
NOTE:
Prior to loading media, take a moment to review media guides. They
are spring loaded to provide improved media control during printing. The
right media guide has a green locking tab which holds the guides in place.
Once the guide is set to the width of the media, it can be locked in place and
future loading of media is simplified.
3a
3b
Inward Wound Media
NOTE:
Follow Steps 3a or 3b
depending on media type. For
Step 4, the media must be placed
UNDER the media guide bar, or
media wandering can occur.
Outward Wound Media
4
5
NOTE:
Once the guides are against
the sides of the roll, push the roll
down in the slot as shown. This
locks the media guide in the proper
position.
