Self-Testing & Software/Printer Driver Installation:
Self-Testing:
The self test checks the printer’s overall operability and lists th printer’s current settings.
IMPORTANT!
The printer should have media installed, be connected to AC power, and
be turned ON.
1. Press and hold the FEED button.
2. Turn the printer ON while holding the FEED button.
3. Release the FEED button when the self test starts to print.
4. Turn printer OFF and then ON again to return to normal printing operation.
Software and Printer Installation:
Self-Testing:
For instructions on installing CognitiveTPG software and drivers, go online to the CognitiveTPG Website at www.
CognitiveTPG.com/downloads_16.aspx. and follow the instructions under the Utility section.
NOTE:
The online C Series User’s Guide also has step-by-step instructions in Chapter 3 on installing and using the various
software and driver packages.
Installation is now complete!
Once software and drivers have been installed, you are ready to print in your application. Please
refer to the User’s Guide for more detailed information on using the C Series printer.
Contact your reseller or CognitiveTPG for information on CognitiveTPG-approved media, cleaning supplies, and printheads
and parts: 1-800-732-8950
7
8
9
10
11
12
Thermal Transfer Printers Only -- Loading Ribbon (Cont’d):
