Instruction # 7055
3
Figure 3: unbolt sway bar from frame
Figure 4: sway bar hanging
4. Unscrew the large nut holding the pitman arm to the steering box using a 46mm open end
wrench, or an 18" adjustable wrench. Figure 5
5. unbolt the steering box from the frame by removing the 3 bolts using a 21mm socket as shown in
figure 6
6. use a screw jack to prop the steering box up away from the cross member as shown in figure 7
7. Loosen the nut holding the idler arm to the idler arm pivot with a 30mm end wrench. Then unbolt
the idler pivot from the frame and pry it out of the mounting pocket as shown in figure 8.
