COLASIT AG
Plastic construction
CH-3700 Spiez
Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61
TD-000 802-E
Edition 10/2019, Subject to alteration
Copyright by COLASIT AG Spiez
Page 4
Part 1: General
1
General
OBLIGATIONS
Prior to any work done on or with the fan, we place you under an obligation to
read this operating manual and any further contractors’ operating instructions
carefully and through to the end.
Should anything not be clear, please get in touch with us immediately. Do not put
the fan into operation as long as uncertainties exist.
As soon as you start up the fan you confirm that you have read and understood
the operating manual.
After acquainting yourself with the fan and its operational performance together
with your production processes, we recommend that you make a note of the
different modes of operation in a “process instruction”.
Together with this operating manual, any acceptance documents, works acceptance certificates and the EU
Declaration of Conformity, the process instruction forms part of the complete system documentation.
For the fan, a separate risk analysis was conducted as a prerequisite for writing this operating
manual. Risks were evaluated and any remaining residual risks are pointed out in this operating
manual.
When extracting aggressive gases, it is imperative to review the suitability of the
materials:
▪ Once the principal or the operator has notified us of the gas mix and the
maximum operating temperature, the suitability and any applicable
restrictions will be confirmed in the data sheet of COLASIT AG.
▪ In the absence of a written notification with regard to the extracted
medium by the principal, the operator is responsible without limitation
for assessing the suitability for the operation of the ventilator.
1.1
Definition
The term "COLASIT fan" stands for a Swiss high-quality product and contains all the components and
individual parts as specified in the purchase order or in the material parts list, which, when assembled, form
a functional unit.
1.2
Production of COLASIT-fans
The fan was manufactured using modern production methods and was extensively tested both during
manufacture and as a finished product by the COLASIT quality assurance system. The methods and
processes used in production and monitoring correspond to the state of the art. The personnel entrusted
with production of the fan have the appropriate skills and possess valid qualifications.
All fans with engine are subjected to a successful test run at the manufacturer’s production facilities.
1.3
Warranty
Warranty ends on the date stated in the general terms of sale and delivery. Warranty is limited to the
delivery of spare parts or the rep
air of defective parts at the manufacturer’s factory. Any further claims or the
replacement of non-repairable or wear parts are excluded.
We guarantee the availability of spare parts identical in construction to the original over a period of 10 years
effective from the date of delivery.
