12
6) Disassemble the dispensing head by first opening the
dispense handle.
Pull the handle retaining rod out far enough to allow the first
handle to disengage.
Return the retaining rod to its original position. Using the rod as
a fulcrum, lever the dispense piston out of the dispense head with
the handle.
Using the O-RING EXTRACTOR, remove the piston o-rings.
Each piston o-ring groove is notched for easy insertion of the o-
ring extractor.
Turn the dispensing head over and remove the large o-ring from
the back of the head.
7) Remove the beater/auger from the freezer cylinder. Pull
the beater STRAIGHT out towards you. Should it became
jammed, DO NOT FORCE. Tap the front of the beater back
into the cylinder with the palm of your hand.
