Need Help?
Schedule Video Call
Support@coldtribe.com
Tub Disassembly
1. Once all water is out - open the air
valve cap and press the valve down to
ensure it is in down position. Keep air
valve in down position
* Caution high
pressure air may be loud *
2. Fold the logo side in so the tub edge
lines up with the bottom inside edge.
3. Next fold the opposite side over top
ensuring edge lines up with the bottom of
the other side.
4. Use your body weight to push out the air
while folding sides down.
5. Push the air valve once again to lock in
the up position.
6. Take Pump and connect the hose to the
deflate side. Then connect to tub and
deflate the remaining air from the tub.
7. Begin to roll the tub from the short side
ensuring that the connections are
protected inside the fold
.
8. Use the straps to tighten the rolled up tub
9. Place in bag and you're ready to go.
Email Us If You Need Help!
coldture.com
