Need Help?
Schedule Video Call
Support@coldtribe.com
Filter Maintenance:
1. Once every 2-3 weeks or as needed
clean the filter.
2. Start by closing the water valve that is
before the filter or at the base of the tub.
3. Open the filter cartridge housing and
remove the filter along with the dirty water.
4. Take the filter to a space where you can
rinse the filter with a higher pressure nosal
in a up and down motion clearing the pleats
of any debris.
5. Put the filter back in the housing and
screw tightly back in place. Ensure all
rubber seals are in place.
6. Ensure you open the valve again once
everything is done.
* Important! *
Replace filter element every 2-3 months
or as per use and water quality.
Water quality maintenance: use granular
chlorine and chlorine puck to ensure
appropriate free chlorine levels are
maintained in the tub - test water weekly
* Low water flow and/or flashing filter
signal on chiller requires filter cleaning.*
coldture.com
