Need Help?
Schedule Video Call
Support@coldtribe.com
Chiller Assembly
1. Remove and store chiller inlet/outlet
covers.
You have two options for setting up the filter
system. 1.
Screen only
for fast on the go
set up where you dont need fine filtering. 2.
Cartridge filter
(20 micron) installation for
more permanent at home/gym setups.
2. SCREEN ONLY FAST SETUP
1. Screw in screen into Red Inlet
2. Screw over top of screen; the screen
housing.
OR
2. CARTRIDGE FILTER FINE FILTRATION
1. Take small rubber washer and put it
between the double male fitting and
the chiller
2. Center the cartridge filter in the clear
housing and use the cover to close
the filter housing tightly. * make sure
rubber seals are in place
3. Add rubber washer before attaching
filter to chiller
4. Hand tighten the connection
5. Take the metal filter holder and use
appropriate screws to attach to
chiller and filter
coldture.com
