Cole Parmer MICROPUMP 75211-50, Operating Manual

Cole

Parmer

®

SPECIFICATIONS

Output Speed:

40 to 3600 r/min

Operating Temperature:

0˚ to 40˚C (32˚ to 104˚F)

Storage Temperature:

–25˚ to 65˚C (–13˚ to 149˚F)

Chemical Resistance:

ABS plastic case with a polyester label,
gold, irridite-coated aluminum chassis
and zinc-plated screws.
All materials withstand standard 
cleaning solvents.

Line Voltage Limits:

90–130 V or 190–260 V, 50–60 Hz

Power Output:

0.1 hp (0.075 kW)

Maximum Current:

115 V Units:

Controller: 2.2A, shorted
output conditions

230 V Units:

1.1A, shorted output conditions

Start/Stop–Local Control:

Input Voltage:

Function Disable:

15V DC Typ.

Function Enable:

0.8V DC Max.

Input Current:

Function Disable:

100 µA Max. leakage

Function Enable:

1.5mA Max.

Maximum Torque:

30 oz-in (2 kg•cm)

Speed Regulation:

Line:

±1%

Load:

±2% 

Speed Drift:

±10%

Enclosure Rating:

IP23 per IEC529

Humidity (non-condensing):

10% to 90%

Altitude:

Less than 2000 m

Display:

Green LED

Dimensions (L 

W 

H):

11-1/2 in 

8 in 

7-1/4 in

(292 mm 

203 mm 

184 mm)

Weight:

11 pounds (5 kg)

Remote Control

4–20 mA Input:

250 ohms typical input impedance 
referenced to signal ground. 
4 mA, (Stop); 20 mA, (Full Speed)
Accuracy: 3% F.S., Linear Resolution
Overload Capability: 10V or 40 mA max.

2–10 V Input:

10 K ohms typical input impedance 
referenced to signal ground.
2 V, (Stop); 10 V, (Full Speed)
Accuracy: 3% F.S., Linear Resolution
Overload Capability: 15V max.

Compliance:

115V

115V: UL508, CSA C22.2, No. 14-M91

230V

230V (For CE Mark):
EN61010-1/A2: 1995
(EU Low Voltage Directive) and
EN61326-1/A1: 1998
(EU EMC Directive)

Pollution Degree:

Pollution Degree 2 per IEC 664
(Indoor use—lab, office)

Installation Category:

Installation Category II per IEC 664
(Local level—appliances, 
portable equipment, etc.)

REPLACEMENT PARTS

AND ACCESSORIES;

SPECIFICATIONS

ACCESSOIRES ET PIÈCES DE

RECHANGE ;

CARACTÉRISTIQUES

TECHNIQUES

ERSATZTEILE UND ZUBEHÖR;

TECHNISCHE DATEN

PIEZAS DE REPUESTO Y

ACCESORIOS;

ESPECIFICACIONES

ACCESSORI E RICAMBI;

SPECIFICHE TECNICHE

15