Note:
Make sure that the batteries are inserted in the right directions (as marked in the
diagram above)
5.2 Inserting a MicroSD Memory Card (not included)
This camera has no built-in internal memory. The memory can be gained with a MicroSD
memory card (not included).
Follow the instructions below to insert the optional MicroSD memory card into the camera.
1. Turn off the camera first.
2. Open the battery door (please make sure the battery door was unlocked before open).
3. Insert the MicroSD card into the camera.
Note:
1. There is only one right direction to insert the MicroSD memory card into the slot. Do not
force the card into the memory card-slot, which may damage both the camera and the
MicroSD memory card.
2. The MicroSD memory card must be formatted before taking photographs. See the
following section for more information.
5.3 Formatting the MicroSD Memory Card
1. Press the Menu button (
) in PHOTO or VIDEO mode.
2. Select the setup mode by pressing the Right button.
3. Select the format icon by pressing the
W
( ) button and press the Shutter button to
confirm.
4. Press the Shutter button to format the MicroSD memory card.
5.4 Setting the Resolution
The camera can be set to different resolutions.
1. Press the Menu button (
) in PHOTO mode, select the resolutions icon by the
W
( )
key and press the Shutter to confirm.
Available resolutions: VGA (640 x 480), 3M (2048 x 1536),5M(2592x1944);
8M(3264x2448); 14M (4320x3240)
; 20M=5184X3888.
2. Five different resolutions will be displayed. Select the desired resolution by using the Up
or Down button and press the Shutter button to confirm the selection.
5.5 Taking Photographs
1. Turn on the camera.
2. If you are not sure if there is enough lighting, turn on the automatic flash(
) by
pressing the Flash button. (If the battery power is too low, the flash will not be activated).
3. Use the LCD screen to aim at the object you wish to take photographs of.
4. Press the Shutter button and wait until the LCD display turns on again.
Caution:
1) Taking pictures for fast-moving object is not recommended.
2) Image may be distorted when taking pictures in a moving vehicle.
5.6 Zoom In and Out
The camera can zoom in up to 4 times.
Zoom in or out by pressing the Up or Down button, a number will appear on the display,
4x is
the maximum zoom ratio.
5.7 Taking a Self-Portrait Shot Using the Front Monitor
If you want to take a photo of yourself, you can simply use the front LCD screen. Follow the
steps below:
1. Press the Monitor switching button to switch to the front monitor.
2. Use the front monitor as a viewfinder to aim at yourself.
3. Press the Shutter button to take a photo of yourself.
5.8 Self-Timer Setting
You can also use the self-timer function when you take a photograph of yourself or when you
take a photograph without flash of an object. To avoid shaking of the camera , a tripod is
recommended.
1. Set the camera to photo mode.
2. Press the Menu button ( ). The menu will appear.
3. Press the
W
( ) button to select Self Timer and confirm by pressing the SHUTTER
button.
4. Press the
W
( ) button to select the “On” option
5. Press the Shutter button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photos of.
7. Press the Shutter button to take a photograph.
8. The photo will be taken after the timer reaches the delay time of 10 seconds. The camera
will beep during the delay time.
5.9 Recording Video Clips
1. Press the Mode button to select the video clip mode (
).
2. For setting the resolution, Press the Menu ( ) button and select Resolution, then press
the Shutter button to confirm. Two resolutions will be displayed.
VGA (640 x 480), QVGA (320 x 240).
3. Press the Shutter button to start recording videos, press the right button to pause and
press the Shutter button again to stop recording. The video clip will then be saved as an
AVI file in the MicroSD memory card.
5.10 Playback Photographs
The camera provides two options for playback: a) Single b) Thumbnail
1. Press the Playback ( ) button to enter the Playback mode.
2. The last picture or video clip taken will be displayed. Press the
W
( ) to enter the
thumbnail mode. Press the Left /Right /Up /Down button to select the desired picture, and
press the Shutter button to view.
3. In full screen display, press the
T
(
)
button to zoom in the photo.
4. To shift the image in zoom-in mode, press the Mode/Menu/Left/Right buttons.
5. Press the Menu ( ) button in Playback mode, press again and hold the Menu button until
the menu options displayed. Select slide show and set up the desired slide show way.
Press the Shutter button to confirm. The pictures saved in the MicroSD card will be
displayed in sequence automatically. To stop the slide show, press the Shutter button.
6. Press the Menu ( ) button in Playback mode, press again and hold the menu button until
the menu options displayed. Select Photo Effect and press the Shutter button. Select the
desired effect by pressing the up/down button and press the Shutter button to confirm.
The image will be saved as a separate image.
5.11 Protecting Photographs / Videos
You can prevent the photographs/videos in the MicroSD card from accidental erasure.
Follow the instructions below to protect photographs/videos.
1. Press the Playback ( ) button to enter the Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be protected.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button
until the menu options displayed. Select Protect and press the Shutter button
4. Select “Single” or “Protect all” and press the Shutter button to confirm.
5.12 Resizing Photographs
A captured image can be resized and saved as a separate image.
Follow the instructions below to resize photographs.
1. Press the Playback ( ) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph to be resized.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button
until the menu options displayed. Select Resize and press the Shutter button
4. Select the new size and press the Shutter button to confirm. The image will be saved as a
separate image.
5.13 Playback Video Clips
1. When video clips are displayed, press the Up button to start video playback and press the
Up button again to pause the playback.
2.
Press the Right button for fast forward or press the Left button for fast rewind.
3.
Press the Mode button to stop and exit .
5.14 Deleting Photographs and Video Clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in
the memory card.
Follow the instructions below to delete photographs/videos.
1. Press the Playback ( ) button to enter the playback mode.
2. Press the Left or Right button to select the photograph/video clip to be deleted.
3. Press the Menu/Delete button
（ ）
and select “Single” or “All” .
4. Press the Shutter button to confirm.
5. Press the Menu button to exit.
NOTE:
Select “All” and press the Shutter button to confirm, all the pictures and videos will
be deleted. Photos that are protected from accidental erasure cannot be deleted. To delete
photos, set the protect setting for the set photos to unprotect mode (Section 5.11), you can
then delete the photos by following the above 1- 5 procedures.
6. Connecting to a PC
The unit can be connected to the computer as mass storage device and transfer photo/video
files for storage.
7. Specifications
Sensor
14.0 Mega pixels CMOS sensor
20 Mega pixels: (5184X3888)
14 Mega pixels: (4320x3240)
8.0 Mega pixels: (3264x2448)
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
Image resolution
VGA: (640x480)
Lens
F/2.8 f = 8.5mm
Focus range
0.5m– infinity
Digital zoom
4x
Flash strobe
Built-in ( Auto / force / off )
M-Shutter
Yes
LCD display
2.7+1.8" TFT LCD color display
White balance
Auto / Daylight / Cloudy / Tungsten/ Fluorescent
Video Frame Rate
30fps@VGA / 30fps@QVGA
External Storage
Media
MicroSD card, not included (supports up to 32GB)
File format
Picture: JPEG, Video: AVI
Self timer
10 seconds
PC interface
USB 2.0
Power source
2 x AAA alkaline batteries
8. Computer System Requirements
Operating system
WinXP (SP3)
、
Vista32/64 Win7&Win8 32/64 and Mac
OS X 10.6.8 or above
CPU
Pentium III or above
RAM
At
least
64MB
Interface
USB
port
CD
4x speed CD ROM or above
9. Troubleshooting
Problem
Cause
Solution
Cannot turn on the
camera
Low battery power.
Batteries placed at
wrong polarities.
Replace or install the batteries
correctly.
Photos can not be saved
when taking pictures.
The memory card hasn’t
been formatted properly.
Format the memory card in setup
mode of the camera. Please refer
to section 5.3.
Cannot find removable
disk after connecting the
camera to the computer.
Connection failure.
Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work.
Battery power is too low. Replace with new 2 x AAA alkaline
batteries
The batteries used up
very fast.
Old, used up, battery
Replace with new 2 x AAA alkaline
batteries
The photos are blurry
1. The camera is not
held steadily
2. The lens of camera is
dirty.
1. Hold the camera steadily until it
beeps when taking photos.
2. Clean the lens with soft and dry
cloth.
