Pole Assembly
– You will need to assemble and connect
one pole at a time to the hub.
– Do not completely assemble poles.
a) Beginning at spring-clip end of pole,
assemble all but the last shock-corded
section. The pole and one section
should curve downward. (illus. 2)
b) Insert the spring-clip end into one of
the hub ports until it clicks into position.
(illus. 1), (illus. 2)
c) Repeat for each of the three remaining
poles. (illus. 2)
12’ x 12’ Insta-Clip Screen House
1
When You Are Ready To Set Up
Your Shelter
– Select a level area clear of rocks,
branches and other hard or sharp objects.
– Do not set up your shelter under trees.
– For easier set up, two or more people
are recommended.
– Place fabric in center of selected location
and assemble above fabric.
ASSEMBLY PARTS
Instructions apply to Part Number 9392-522
Poles (4) Part No. 9392-1151
Hub (1) Part No. 9392-1091
Illus. 2
Screen House laid out in position
with partially assembled frame
locked into hub.
Illus. 1
Poles inserted
into hub
Hub
Hub
Frame Clips
