background image

6

HOW TO USE YOUR COLEMAN AT50 

A.

 FINDER SCOPE ALIGNMENT

 Since a telescope by design has a narrow field of view, it can be challenging to locate the 

particular object you wish to view. For this reason the telescope is fitted with a low-power, 

wide-field miniature optical device called a finder scope. Always use your finder scope to first 

locate the object you would like to view. 

The finder scope should be aligned with the main 

telescope tube before you begin using the telescope,

 in order that both the telescope and 

finder scope are positioned to provide exactly the same angle and view.  

 Note:  Objects in the finder scope are upside down. This is normal and is common to 

all astronomical telescopes. 

B.  COMPLETE THE FOLLOWING SETTINGS IN DAYLIGHT: 

1)  With either the SR4 or H12.5 eyepiece in the focusing tube, rotate the tripod head toward 

an object you have selected to view. Direct the tripod head to an easily recognizable, 

stationary object that is at least 200-300 feet away.  You may insert the eyepieces directly into 

the focusing tube or into the diagonal mirror that is inserted into the focusing tube.   

2)  When the telescope is pointing in the general direction of the object you wish to view, 

adjust the elevation (up and down angle).  This is done by loosening the fixing screw and 

gently moving the telescope up or down until it is aligned with the object to be viewed. 

3)  Look through the finderscope (6) and refine the elevation as described above. Center the 

object in the field of view.  You may also adjust the finderscope by simply releasing one of the 

small adjusting screws holding the finderscope and re-position the finder scope until the 

object is centered within the X-shaped crosshairs. 

4)  All screws should be completely tightened as soon as the view through the finder scope 

coincides with the view of the main telescope. 

5)  You may need to repeat this procedure to ensure a perfect alignment. 

6)  Look through the eyepiece and focus the image 

by slowly rotating the pinion focusing knob 

(2). 

7) 

.

C. ABOUT MAGNIFICATION: 

The magnification power of a telescope indicates how much an image is enlarged or how big 

and close it appears to the viewer. The focal length of the eyepiece, combined with the focal 

length of the telescope, determines the magnification power. To calculate the power of your 

telescope with any particular eyepiece, simply divide the focal length of the telescope (625mm) 

by the focal length of the eyepiece (indicated in “mm” on the eyepiece collar). 

For the various telescope powers, please refer to the next section 

ABOUT MAGNIFICATION

Summary of Contents for AT50













Reviews: