8
Proper Water Level
NOTE:
Drawings for illustration purpose only. May not
reflect actual product. Not to scale.
Dismantling
1. Unscrew the drain valve cap on the outside of the pool counter
clockwise and remove.
2. Connect the adaptor to the hose and put the other end of the
hose in the area where you are going to drain your pool.
(Check local regulations for drainage by-laws).
3. Screw control ring of the hose adaptor clockwise onto the
drain valve. The drain valve will be open and water will start to
drain automatically.
ATTENTION:
Water flow can be controlled with
the control ring.
4. When draining is finished, unscrew the control ring to close
the valve.
5. Disconnect the hose.
6. Screw the cap back onto the drain valve.
7. Air dry pool.
ATTENTION:
Do not leave the drained pool
outside.
Storage
1. Please remove all accessories and spare parts of the pool and
be sure they are clean and dry before you store them.
2. Once pool is completely dry, sprinkle with talcum powder to
prevent pool from sticking together. Carefully fold pool.
If pool is not completely dry, mold may result and damage the
pool liner.
3. Store liner and accessories in a dry place with a moderate
temperature between 5ºC / 41ºF and 38ºC / 100ºF.
4. During the rainy season, pool and accessories should be
stored as per above instructions.
5. Improper draining of the pool might cause serious personal
injury and/or damage to personal property.
6. We strongly recommend the pool is disassembled and stored
in a dry location out of chlidren's reach during the off season
(winter months).
IMPORTANT:
Don't use granulate tablets or throw
the tablet directly in the water. The chemicals can deposit on the
bottom, damage the material and discolor the PVC.
Using chemical liquid (not included):
IMPORTANT:
Add chemical liquid in small doses
and in the center of the pool to avoid direct contact between the
chemicals and the PVC surface. Direct contact can damage the
material and discolor the surface.
NOTE:
Remove the chemical dispenser from pool when
the pool is in use.
IMPORTANT:
After performing chemical
maintenance and before using the pool, use a test kit (not
included) to test the water chemistry. We recommend
maintaining your water according to the following table.
Pool Maintenance
If you do not adhere to the maintenance guidelines below, your
health might be at risk, especially that of your children.
Using chemical tablets (not included):
NOTE:
Chemconnect or Chemical Floater must be used
when you perform chemical maintenance with tablets. Your
purchased item may not include any of those dispensers, in
this case you can purchase it by visiting our website
www.bestwaycorp.com or at the nearest pool dealer.
retailer for more information about chemical maintenance. Pay
close attention to the chemical manufacturer's instructions. Pool
damage resulting from misuse of chemicals and
mismanagement of pool water is not covered by the warranty.
IMPORTANT:
Over usage of chemicals can
discolor the printing and all points of the pool material. It can
also damage the structure of the pool liner.
To keep your pool clean:
1. Contact your local pool supply shop for advice and purchase
of chemicals and pH kits. One of the most important factors to
increase the life of the liner is to keep continuously clean and
healthy water. Please strictly follow the instructions from
professional technicians for the water treatment through the
use of chemicals.
2. Locate a bucket of water next to pool to clean users’ feet
before entering pool.
3. Cover the pool when not in use.
4. Skim pool regularly to avoid settled dirt.
5. Check and wash the filter cartridge regularly.
6. Gently clean any scum from below the top ring with a clean
cloth.
7. Please be careful in case of rain water, kindly check that the
water level is not higher than the expected. If so, YOU HAVE
TO DISCHARGE THE EXCESS WATER.
8. If it rains, check that the water level is not higher than the
specified level. If water exceeds the specified levels, drain the
pool to the specified level.
Proper maintenance can maximize the life of
your pool.
During the season of use of the swimming pool, the filtration
system must be necessarily put into service every day, enough
time to assure at least a complete renewal of the volume of
water.
NOTE:
The pump is used to circulate the water and to
filter small particles. In order to keep your pool water clean and
hygienic, you must also add chemicals.
TEST
pH value
Cyanuric acid
Free chlorine
Chlorine compound
Algae
Calcium hardness
IDEAL VALUES
7.4 – 7.6
30 – 50 ppm
2 – 4 ppm
0
None visible
200 – 400 ppm
IMPORTANT:
When preparing the pool for storage,
make sure there is 10 cm (4 in.) between the folding point and
the circumference of each window. The windows should not be
creased or be folded during storage.
NOTE:
Damage resulting from chemical imbalance is not
covered by the warranty. Pool chemicals are potentially toxic
and should be handled with care. There are serious health risks
from chemical vapors and the incorrect labeling and storage of
chemical containers. Please consult your local pool supply
