69
WARNING
Improper adjustment of the handlebars or incorrect torquing of the
adjuster block tightening bolts can cause limited steering or loosening of
the handlebars, resulting in loss of control and possible serious
personal injury or death.
Handlebar Adjustment
Your ATV has handlebars
which can be adjusted for
your personal fit.
1. Remove the handlebar cover.
2. Loosen the four bolts.
3. Adjust handlebar to desired
height. Be sure handlebars do
not hit gas tank or any other part
of machine when turned fully to left or right.
4. Torque handlebar adjuster block to 10-12 ft. lbs. (14-16 Nm).
NOTE:
Tighten bolts so there is an equal gap at the front and rear of the
handlebar block. Improper gap will result in improper fit of upper pod.
