24
MAINTENANCE
Centrifugal Clutch
Cleaning and lubrication
To help ensure the maximum life out of
the Centrifugal clutch. It is important to
clean and lubricate the clutch after
every 5 hours of operation. To Clean
and lubricate, follow the instructions
below
1. Make sure engine is not running and
that the engine and clutch has had time
to cool.
2. Remove clutch cover (1).
3. Wipe off Centrifugal clutch (2) with a
clean rag.
4. Lubricate Centrifugal clutch (2) using
the same type of motor oil that is used
in the engine. Place a few drops of
motor oil on the drive shaft (3) where
the clutch is attached. Do not oil any
other portion of the clutch. DO NOT
PLACE ANY OIL IN THE LARGE HOLES IN
THE CLUTCH. THE HOLES ARE FOR AIR
CIRCULATION ONLY. DO NOT OIL THE
INSIDE OF THE CLUTCH.
Performing maintenance and inspection
on the centrifugal clutch while the engine
is running could be hazardous.
Performing maintenance and inspec-
tions on the centrifugal clutch while the
engine is running could result in getting
body parts or clothing caught in moving
parts, or could result in touching hot items
which could result in severe injury.
Shut off engine and allow to cool before
performing maintenance and inspection
on the centrifugal clutch.
!
WARNING
1
2 3
Operating the mini bike without the clutch
cover in place could be Hazardous.
Operating the mini bike without the clutch
cover could result in getting body parts
or loose clothing caught in moving parts
which could result in severe injury.
Never Start or operate the mini bike
without the clutch cover in place.
!
WARNING
5. RE-INSTALL THE CLUTCH COVER
BEFORE STARTING OR OPERATING THE
MINI BIKE.