Coleman Roto Mold Spa (online sales)
LTR50001136, Rev. A
Cleaning and Maintenance
27
Maintenance Schedule
Each time you refill the spa
Follow the section “Starting the Spa with Fresh Water” on
page
21
.
Prior to each use
Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week
Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale pre-
venter.
Once a month
Deep clean your spa’s filter. (Follow filter cleaning instruction at
beginning of this section)
Every two to four months
Drain and clean your spa with a multi-purpose cleaner for spas.
Clean and treat spa cover, pillows, and cabinet (if equipped) with a
vinyl cleaner for spas.
Refill your spa, following the section “Starting the Spa with Fresh
Water” on page 21
.
Every four to six months
Change the spa water. You may find the need to change your spa
water more frequently with heavy use.
When empty, your spa should be cleaned with a non-abrasive
cleaner and then rinsed thoroughly.
Every six months
Retighten jets using the jet wrench tool, following the instructions
on page 26.
Once a year
Replace filter cartridges if the pleats appear frayed.
If you use an ozonator, you will need to replace the ozone car-
tridge.
