LCD display
The LCD-display is used to
enter
and indicate data and operating states of the monitor
and labeller. The background illumination increases the legibility and shows at the same
time, that the monitor is on. A
cursor
helps to select and enter data.
Orientation ar-
rows
on the border of the LCD help to pass through the function trees and to select
menu items.
Function keys
The monitor is operated by
five function keys
. A
LED function display
is assigned to
each function key showing that the operator is moving in an assigned
function tree
. In
a function tree it is possible to access to particular function through
branches
.
If changing from one
function tree
to another, the actual branch, in which the operator
works, will be temporarily memorized, so that upon a call of the
previous
function tree
he is in the previous
branch
. The particular function keys and the parameters which
can be selected by each function key are described below.
RUN/STOP key (6)
The
RUN/STOP
key is used to start
(RUN)
or stop
(STOP)
the
Collamat
®
. The
RUN
state
is indicated by a
green LED
(8)
. The
STOP
state is indicated by a
red LED
(7)
. In
RUN
state it is not possible to
change all functions, because faults could occur during labelling. But in
STOP
state all functions can be changed.
Numerical keyboard (10)
With the
numerical keys 0...9
all numerical data can be directly ente-
red via the keyboard. A decimal point
','
can be entered by key
(11)
.
ENTER key (12)
With the
ENTER
key the inputs are terminated. The
ENTER
key is al-
so used to select the
menu item
, on which the cursor is actually
positioned.
0...9
ENTER
5999.530-01B 13.08.98 WM
Page 8 /
49
