Shaker
V
IBA
15
&
V
IBA
25
Collomix Rühr- und Mischgeräte GmbH
D-85080
Gaimersheim
10
Edition
2.3-05
4.4
Moving the machine
The VIBA Shaker has two transport rollers at the front end of the housing. Moving the
machine over short distances is thus easy and requires little effort.
•
Grip under the panel above the door recess with the one hand and hold the top of
the housing with the other.
•
Carefully tilt the machine forward until the transport rollers come to rest on the floor.
•
You can now push the machine along on its rollers with ease.
4.5
Manual door release
The door of the VIBA Shaker comes with a safety interlock. The door is locked when a
mixing cycle is started and cannot be opened while the machine is working. For servicing
purposes, however, it is possible for the door interlock to be released by hand.
Releasing the safety door interlock
•
Remove the plastic plug cap from the left side of the machine.
•
Use a screwdriver to push the release button of the door interlock
•
Open the door.
Do not start the machine if any safety devices are defective or modified!
Grip the machine
Move the machine
